We notice you are visiting from a country other than Australia or New Zealand. To order in USD and for international delivery please visit our International website

How to Guide: Wall Graphics


What you will need:

  • Masking tape
  • Squeegee/straight edged tool
  • Tape measure
  • Two people (if wall graphic is greater than 650mm x 650mm)

Step 1

Clean wall and hands and ensure they are dry before commencing application. Position wall graphic and tape corners with small pieces of masking tape.

Step 2

Check panel is straight by measuring to a known straight edge.

Step 3

Apply masking tape along the top edge of the panel.

Step 4

Gently lift the panel from the bottom up to the tape at the top. The tape will act as a hinge. Lift until you can peel the backing paper away from the sticker.

Step 5

Continue to peel the paper away from the sticker. At the same time, gently smooth the sticker onto the wall,  with the squeegee / straight edge from the top down.

Step 6

When the paper has been completely removed and the panel is on the wall, smooth over the graphic again, from top to bottom.

Step 7

Peel off the masking tape.

Step 8

The adhesive is removable and able to be repositioned. Keep the backing paper for storage of the wall graphic when not in use.


Still have a question?

If you cannot find answer to your question, you can always contact us and we will be happy to help!      

Postal address
3 Brown St (Postal Only)
Manly, Whangaparoa 0930
New Zealand
Drop us a line
Keep up to date with eNews
News, Promotions and more